ELECTROYUZHATOMMONTAZH Ltd. Supply List

ELECTROYUZHATOMMONTAZH Ltd.

Certificate ISO 9001

UA RU

SUPPLY LIST (information over tel. +38 057 7662072)
Metal Structures for Cable Laying	Electrotechnical zinc coated steel duct sections The electrotechnical zinc coated steel duct sections of КП type are aimed for housing power and control cables or wire either outdoors or indoors. Climatic version - T (zinc coating). Protection grade - IP31 as per GOST 14254-80. Zinc coated block-type metal duct sections The zinc coated block-type metal duct sections of ККБ type are aimed for housing power cables up to 10 kW or both power and control cables at service sites, frame structures, columns and walls, over-hanging inside buildings as well as outdoors on special technological trestles and similar structures. Climatic version - У3, T (zinc coating). Protection grade - IP33 as per GOST 14254-80. Zinc Coated Cable Trays The trays are intended for laying power and control cables inside production shops and cable buildings. Climatic version - УХЛ as per GOST 15150-69. Zinc Coated Support Posts The posts are aimed to support elements intended for laying power and control cables inside production shops, cable buildings. Zinc Coated Brackets The brackets are aimed for laying power and control cables inside production shops, cable buildings. Punched Steel Parts for Electric Equipment Mounting These are intended for fixing cables, wires, pipes and apparatus used for electric mounting works as well as for constructing various steel structures needed for electric mounting works.
Non-hermetic Metal Hoses	Metal hoses are used for curving the piped cable routes.
Cable Terminals	Copper, aluminium and copper-aluminium cable terminals are intended for terminating wire and cables with copper or aluminium core with cross-section up to 240 mm² for voltage 35 kV at most.
Cable and Pipe Holders, types СК, СН, СД	The holders are intended for fixing cables and pipes during their laying onto construction and support structures. Climatic version - У3, T (with zinc coating) as per GOST 15150-69.
Bunching Belts, Bandages	These are intended for bunching cables and wires, fixing single wire or cable during the electric equipment mounting.
Fittings for Control Devices and Instruments Mounting	The items are intended for installation of primary transducers, control-and-measuring instrumentation used for measuring, signaling and adjusting the temperature, pressure, discharge, level and other technological parameters at TPP and NPP.
PVC Plastic Flexible Pipes	These are aimed for insulation of bare wire sections as well as for marking the cable and wire ends which are under DC or AC voltage up to 1000 B and frequency of 50 Hz.
Thermoshrinking Insulating Sleeves	These are used for sheathing the core conection sections in cable couplings as well as for tight connection of plastic hosed cable terminals for voltage up to 35 kV.
Cable Couplings and Terminators	Thermoshrinking Cable Terminators for Outdoors and Indoors Installation Cable terminators are designed for terminating separate cores of the cables for voltage of 1 kV, 6 kV, and 10 kV both outdoors and indoors. Thermoshrinking Cable Couplings They are designed for coupling separate cables cores for voltage of 1 kV, 6 kV and 10 kV. Thermoshrinking Cable Terminators These cable terminators are designed for terminating control cables for a.c. 660 V, 100 Hz or d.c. 1000 V. Cable Terminators for Outdoors and Indoors Installation These epoxy, polyuretane cable terminators are designed for terminating separate cores of 1 kV, 6 kV, and 10 kV cables. Epoxy Cable Couplings They are designed for terminating separate cores of 6 kV and 10 kV power cables. Lead Cable Couplings They are designed for terminating separate cores of 6 kV and 10 kV power cables.
Boxes For Cable Wiring up to 1000 V	Branch, Modular, and Conduit Boxes of K600M, KM, KOП Types These are used for branching and pulling through copper and aluminium wire and cables in circiuts with voltage up to 1000 V. Climatic version - УХЛ and 0 as per GOST 15150-69. Protection grade - IP44 as per GOST 14254-90. Terminal Boxes of KKC Type Terminal boxes are used for branching copper and aluminium wire and cables with cross-section from 0,5 to 6 mm² in secondary commutation circuits with voltage up to 600 V. Climatic version - УХЛ and 0 as per GOST 15150-69. Protection grade - IP44 as per GOST 14254-90.
Distribution Cubicles	These are intended for distribution of electrical power, electric equipment protection at overloads and short circuits for infrequent (up to 6 per day) operational switching on/off of electrical circuits with rated voltage of a.c. 380 V. Climatic version - У3 as per GOST 15150-69. Rated voltage - a. c. 380 V, 50 and 60 Hz. Protection degree IP21, IP54 as per GOST 14254-80.
Electrically Driven Valve Units	Electrically driven valve units are designed for mounting the primary and secondary electric circuits as well as for local control of valves. Units are supplied either with "ШР" connection or with "ЗТ" clamp.
Stands for Control Devices and Instrumentation for TPP	The stands are intended to accomodate pressure gages of different function which control parameters of technological installations with aggressive and non-aggressive media with pressure up to 38 MPa. Climatic version - УХЛ4.
CMI and Automatic Means Sensors Boards for NPP	The boards are used for accommodation primary devices which control the parameters of technological installations. The boards are housed in special service and semi-service rooms of technological systems of NPP and NSP. Climatic version - УХЛ4 as per GOCT 15150-69.

Mail address: 16, Mironositska Str., Kharkіv, 61002, Ukraine
Tel.: +38 057 7662077
Fax: +38 057 7662075
Procurement Dept: +38 057 7662072